Static IP Address (Local Network)

This guide explains how to configure a static IP address on a local network so a computer always uses the same IP address when connected to the same LAN or router.

A static IP provides network stability and predictability inside the local network.


What is a static IP?

A static IP address is a fixed network address assigned to a device on a local network.

Unlike dynamic IP addresses (assigned automatically by the router via DHCP), a static IP does not change when:


Why use a static IP?

Using a static IP is recommended when:

A static IP improves local network reliability, not remote connectivity.


When should you avoid a static IP?

A static IP may not be necessary if:


Local network only (important)

This guide applies only to local network (LAN) IP addresses, such as:

It does not configure:

Remote connectivity is handled separately using a VPN.


Two valid approaches

There are two correct ways to ensure a stable IP address on a local network:

  1. Configure a static IP directly on the device
  2. Reserve an IP address on the router (DHCP reservation)

This guide focuses on device-based static IP configuration, which works independently of the router and does not require router access.


What you need before starting

Before configuring a static IP, you should know:

This information can be obtained from the device’s network settings.


Continue with your operating system

👉 Select your operating system to continue: